For sale European mobile Scaffolding Caster

1.Scaffolding caster wheel 2.Static load capacity can reach 800kgs. 3.Double brake fitting and double pedal design Special specifications is available

Technical Data
Wheel diameter	202mm
Width of Tread	50mm
Size of Plate	135x110mm
Plate hole centres	105x77.5mm
Plate hole	13.6x11mm
Offset	40mm
Overall height	241mm
Load capacity(static)	800kg
Hardness of tread	A 95 Shore

We builds and manufactures scaffold casters and wheels, keeping your scaffolding units mobile. In addition to keeping the workflow rolling, scaffold casters may be equipped with brakes for solid non-rolling stability. Speak to a representative all sizes and requirements for filling your scaffold wheel and caster needs.

Scaffold Caster Applications

Scaffold casters perform well for scaffolding and many other applications. Also suitable for floodlight stands, moveable platforms, and motion picture equipment.

Various wheel sizes and weight capacities meet the requirements for any situation where scaffold and platform units need to be mobilized.

Grease fittings standard on certain scaffolding caster wheel models.

Scaffold Caster Options

Wheels for scaffolding are available in a variety of materials, including rubber on steel, rubber on cast iron, polyurethane on polyolefin, and phenolic.

Scaffold wheel foot operated brakes, engaging both swivel and wheel for optimum stability by using serrated upper brake shoe and curved lower brake.  

    

Mark	Definition
	Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death or serious injury.
	Indicating dangerous situation which is critical for safety as incorrect use may inflict the personal death, serious injury or property damage.
	Indicating dangerous situation as incorrect use may inflict the light personal injury or property damage.

Installation

*Select a model within the range of recommended load per 4 casters of product not exceeding the

maximum loads of equipment or carts.

*Tightly fasten the plate of both faces with bolts & nuts. not to have any gaps.

*Once the model is selected. manufacture the hole distance, hole size, tap & others of Top Plate &

Equipment Plate of selected model either identical or mountable.

How to use

*Following instruction must be complied when using the product, a caster making equipment or carts'

moving easier. Failure in compliance of following instruction may cause the damage on caster, physical

loss of equipment or personal injuries.*Distinguish Manual Driven Casters and Power Drive Casters as per the characteristic of product.  

*The moving of Manual Driven Casters should be made with a speed slower than 4km/h and Power

Driven Casters should be made with a speed slower than 20km/h.*Pay attention not to have the loads of equipment or carts laid to one side, as it may cause inclination.

 http://www.rounya.com               http://www.ry-caster.com